Anzac Day 2021
We were able to join our daughter and her family at the Dawn Service on Anzac Day at Ethan’s Cadet Base. Unfortunately the Cadet rules are that I cannot share any photos of Ethan wearing his uniform. So I have placed some copy paper to indicate where the photos will go. I started my page by embossing Balmy Blue card using the Bark 3D Embossing Folder. I cut Night of Navy card using one of the Basic Border Dies and attached the die cuts down each side of the embossed card before attaching the panel to a Basic White 12″ x 12″ page.
I attached a strip of Night of Navy behind one long edge of a wide strip of Crumb Cake card before attaching it to the page. I cut the title from Night of Navy card using the Playful Alphabet Dies. I stamped the large and small flower from the Painted Poppies stamp set onto Basic White card using Memento Tuxedo Black ink. I coloured the flowers using the Poppy Parade Stampin’ Blends and cut them out using the Painted Labels Dies. I cut Pear Pizzazz card using one of the Poppy Moments Dies to create the leaves. I layered the flowers and leaves together before attaching them to the page. I hope you like the layout and perhaps it will inspire you to create a page of your own.
Bye for now,
Kris
Product Used:
Bouquet of Hope
Today I thought I would share the cards I made using up all of the bits and pieces in the Paper Pumpkin Bouquet of Hope which was released to the Australian market earlier this year. For this particular card design, I created one exactly the same as the directions in the kit and then I created two cards using an additional layer of Basic White card cut using the Stitched so Sweetly Dies. The dies are stamped with the bouquet image from the Bouquet of Hope stamp set. To colour the stamped images I used Flirty Flamingo, Just Jade, Merry Merlot, Bumblebee, Soft Suede and Mossy Meadow Stampin’ Write Markers.
For this second card, I created one card the same as the directions in the kit. For the second card, I flipped the design to portrait but kept the layout the same. For the other three cards, I cut up the card base and used it like designer series paper on the cards, adding embossing with the Ornate Floral 3D Embossing Folder on one as well as some circle layers cut using the Layering Circle Dies. I used Thick Basic White and Just Jade card for the card bases.
For the next card, I created two cards as per the directions in the kit. For the next two, I used the card front to decorate the panels like designer series paper. I also cut the gold die cut in half so that I could use it on both cards. I added some of the twine to one and used the Double Oval Punch to add the greeting from the Peaceful Moments stamp set. The last card uses the back of the card base which I embossed using the Ornate Floral 3D Embossing Folder. I cut Gold Foil card using one of the dies from the Encircled in Beauty Dies to add to the card front. The greeting is stamped onto a Basic White circle cut using the Layering Circle Dies. The additional card bases are cut from Merry Merlot and Thick Basic White card.
The last four cards are created by cutting up two envelopes and using the lining as Designer Series Paper. The pink cards have Basic White card embossed using the Ornate Floral 3D Embossing Folder and I have used the Layering Circle Dies to add the stamped image. They also have a piece of Rocco Rose card cut using one of the Basic Border Dies. The green cards have the die cut pieces from the Bouquet of Hope card kit which I didn’t use as per the directions. The card bases are Roccoco Rose which is now retired and Thick Basic White. I also used a layer of Mossy Meadow on the Basic White card bases.
I am very happy with these cards, and love that I could turn the ingredients for nine cards to create seventeen cards. The stamp set from this Paper Pumpkin kit is adorable with lovely sayings and images and I know that I will use it lots.
I’d love to hear what you think.
Bye for now,
Kris
Product Used:
For the Guys
I shared the For the Guys card kit yesterday in my Facebook Live. This kit contains enough product to create five each of two cards and they are lovely cards. Today I thought I was share a variation I made using the product from the kit. I began with card bases cut from Early Espresso with the front panel cut down to 5cm (or 2″) and attached panels of the In Good Taste Designer Series Paper. I attached a panel of another pattern of the In Good Taste Designer Series Paper to the inside of each card.
I cut down the card bases from the kit so that they would fit onto my Early Espresso card bases with the fold on the right hand side. I created the card fronts using the pieces from the card kit and stamped greetings using the stamp set and ink included in the kit. To finish off the inside of the cards, I stamped the single tree from the Mountain Air stamp set using the included Mossy Meadow ink. Although I followed the basic idea for creating a Joy Fold Card, I didn’t add anything to hold the front closed.
I’d love to know what you think.
Bye for now,
Kris
Product Used:
Most Wonderful Time
Despite the fact that I have previously shared several cards using this stamp set, this is the first card I created using the Tidings & Trimmings stamp set. I stamped “It’s the Most Wonderful Time of the Year” from the Tidings & Trimmings stamp set onto the bottom right hand corner of Basic White card using Evening Evergreen ink. I cut one long edge of a piece of Tidings of Christmas 6” x 6” Designer Series Paper using the rounded die from the Basic Borders Dies. I cut one edge of a narrow strip of Gold Foil card using the rounded die from the Basic Borders Dies.
I attached the Gold Foil die cut behind the edge of the Designer Series Paper die cut and attached it to the top edge of the stamped Basic White card. The whole panel is attached to scored and folded Cherry Cobbler card. I cut Basic White card using one of the circles from the Layering Circle Dies and attached it to a scalloped circle cut from Gold Foil card using the same dies.
The circle panel is attached to the card front using dimensionals. I stamped the stocking image from the Tidings & Trimmings stamp set onto Basic White card using Cherry Cobbler ink and cut it out using the co-ordinating Christmas Trimmings Die. I attached the die cut to the centre of the Basic White circle. To decorate the inside of the card, I stamped the greeting from the Tidings & Trimmings stamp set onto Basic White card using Evening Evergreen ink. The stamped panel is attached inside the Cherry Cobbler card base.
I actually created this card for my catalogue launch way back in May but I would love to know what you think.
Bye for now,
Kris
Product Used:
You’re in my Thoughts
Today I created two versions of the same card for a couple of lovely ladies who have recently experienced a terrible loss. For the first card, I used one of the dies from the Encircled in Beauty Dies to cut Flirty Flamingo card. The Flirty Flamingo card is then embossed using the Tasteful Textile 3D Embossing Folder. I placed the panel temporarily over a piece of Very Vanilla card and stamped the image from the Encircled in Friendship stamp set into the circle using Memento Tuxedo Black ink. I removed the embossed panel and coloured the image using Dark Flirty Flamingo and Dark Mint Macaron Stampin’ Blends.
I attached the embossed card permanently to the Very Vanilla card before attaching the panel to scored and folded Flirty Flamingo card. I stamped the greeting from the Encircled in Friendship stamp set onto a narrow strip of Very Vanilla card using Flirty Flamingo ink.
The greeting is attached across the bottom of the card. To decorate the inside of the card, I attached a strip of Flirty Flamingo card behind one long edge of a piece of Very Vanilla card embossed using the Tasteful Textile 3D Embossing Folder. The panel is attached across the bottom of Very Vanilla card. I stamped a greeting from the Timeless Tulips stamp set using Flirty Flamingo ink and stamped the single flower from the Encircled in Friendship stamp set beside the greeting using Memento Tuxedo Black ink. The image is once more coloured using Dark Flirty Flamingo and Dark Mint Macaron Stampin’ Blends. The whole panel is attached to the inside of the card base.
For the second card, I used Flirty Flamingo card, Flirty Flamingo ink and the Dark Flirty Flamingo Stampin’ Blend.
Bye for now,
Kris
Product Used:
Holidays
Today’s page shows off a couple of photos of my grandparents, one taken at Currumbin, the other I think was taken at Woolgoolga. I attached two strips of the now retired Forever Greenery Designer Series Paper across a Basic White 12″ x 12″ page. I attached my photos to Early Espresso card and then the page. I printed my journaling onto Basic White card, attached it to Early Espresso card and then to the page. The title is cut from Early Espresso card using the Playful Alphabet Dies. I stamped the images from the Free As A Bird stamp set onto Basic White card. I used Night of Navy, Old Olive, Daffodil Delight, Real Red, Flirty Flamingo and Soft Suede Stampin’ Blends to colour in the bird images.
I cut them out and attached them to the page. I used some photos I found on the internet of Lorikeets and used them as a guide to colour the birds and I think they turned out ok. What do you think?
Bye for now,
Kris
Product Used:
A Christmas Pyramid
Today I have another Pyramid card to share with you using a stamp set from the July to December Mini Catalogue which will be available to customers on the 3rd August. Of course you could always join Stampin’ Up! and you can order this stamp set in your kit! I used Real Red card for the base of the card and added layers of Basic White which I embossed using the Evergreen Forest 3D Embossing Folder.
I stamped the images from the Be Jolly stamp set onto Basic White card using Memento Tuxedo Black ink. I coloured the images using a combination of these Stampin’ Blends – Real Red, Old Olive, Basic Black, Daffodil Delight, Soft Suede and Ivory.
After they were coloured I cut them out. The greetings for the card all come from another soon to be released stamp set called Holly Jolly Wishes. I stamped the greeting for the card front onto Basic White card using Real Red ink and punched it out using the Double Oval Punch. The punched greeting is attached using dimensionals to hold the pyramid open.
The greetings for the other two panels are stamped onto Basic White card using Real Red ink and cut out around the letters. To decorate the inside of the card and to give me somewhere to write a message, I attached Basic White card. I also stamped the little bird from the Be Jolly stamp set onto one piece using Memento Tuxedo Black ink. I added a little colour with the Dark Real Red and Dark Daffodil Delight Stampin’ Blends. These card are really fun to make and they will fold flat to go into a standard envelope. I’d love to know what you think.
Bye for now,
Kris
Product Used:
Come Sailing Pyramid Card
Yesterday in my Facebook Live, I shared how to create a pyramid card and today I have another to share with you. I used three Night of Navy 10.5cm squares to create the card base and added layers of 10cm square Basic White card which are cut in half diagonally and embossed using the Bark 3D Embossing Folder. For the first panel, I stamped the lighthouse and anchor images from the Sailing Home stamp set onto Basic White card using Night of Navy ink.
The images are cut out using the co-ordinating Smooth Sailing Dies. I also used the Smooth Sailing Dies to cut the wheel from Night of Navy card. I attached the wheel and lighthouse to the panel first. I tied a length of the Misty Moonlight/Silver twine from the Flowers For Every Season Ribbon Combo Pack through the anchor and attached it over the lighthouse.
I stamped “happy birthday” from the Peaceful Moments stamp set onto Basic White card using Night of Navy ink and cut it out using the Layering Circle Dies. I attached it using dimensionals so that it would hold the pyramid card in position. To decorate the second panel, I stamped the compass and large sailing ship images from the Sailing Home stamp set onto Basic White card using Night of Navy ink. I cut out the sailing ship using the co-ordinating Smooth Sailing Die.
I also used the same dies to cut the seaweed from Night of Navy card. I cut out the compass image and attached it to a Night of Navy circle cut using the Layering Circles Dies. I attached the seaweed first with the sailing ship on top and lastly the compass image.
To decorate the last panel, I stamped the small sailing ship from the Sailing Home stamp set twice onto Basic White card using Night of Navy ink. I cut out the sailing ships using the co-ordinating Smooth Sailing Die. I also cut the “knot” from Night of Navy card using the same dies. To decorate the inside of the card, I attached Basic White card which I stamped using the rope image from the Sailing Home stamp set before I cut it in half diagonally.
Even though this card stands tall, it will fold flat to go into a standard envelope. How cool is that! I had forgotten how much fun these cards are to create. What about you, do you love them too.
Bye for now,
Kris
Product Used:
Noel
Today’s Christmas Card uses the Festive Foliage stamp which is the size of a full card front. I stamped the Festive Foliage stamp onto Basic White card using Evening Evergreen ink. I used Soft Succulent and Evening Evergreen Stampin’ Blends individually and in different combinations to colour the leaf images. I added just a little colour to the open circles on the image using the Dark Cherry Cobbler Stampin’ Blend.
I cut the image using one of the Stitched Rectangle Dies and attached it to a scored and folded Evening Evergreen card base. I cut Evening Evergreen card using the large star image from the Christmas Trimmings Dies and attached it to the centre of the stamped panel. I stamped “Noel” from the Tidings & Trimmings stamp set onto Basic White card using Cherry Cobbler ink. I punched the greeting using the Double Oval Punch and attached it to the centre of the die cut star using dimensionals.
To decorate the inside of the card, I stamped another greeting from the Tidings & Trimmings stamp set onto Basic White card using Cherry Cobbler ink. I stamped the open three leaf image from the Tidings & Trimmings stamp set beside the greeting using Evening Evergreen ink. I stamped the fill image from the Tidings & Trimmings stamp set using Soft Succulent ink.
I really love this background stamp and overlooked it completely when I first looked through the catalogue. Perhaps you have too.
Bye for now,
Kris
Product Used:
Vellum Embossing
Today’s card was inspired by one I saw somewhere on Pinterest (I think) that used the Pretty Flowers Embossing Folder to create the focal image for a card. I liked the idea and needed to make a card for a special friend and decided to give it a try. I embossed Vellum card using the Pretty Flowers Embossing Folder. I added Poppy Parade, Flirty Flamingo and Granny Apple Green ink to the back of the embossing folder using a Sponge Dauber. I attached the embossed and coloured Vellum to Basic White card and then Poppy Parade card.
The whole panel is attached to scored and folded Thick Basic White card. I stamped the greeting from the Peaceful Moments stamp set onto Basic White card using Poppy Parade ink.
I punched out the greeting using the Double Oval Punch. I added some leaves and a frame from the Expressions in Ink Ephemera Pack to the card front before attaching the greeting to the centre of the fame using dimensionals. To decorate the inside of the card, I created another embossed and coloured Vellum panel. I attached the Vellum to Basic White card and then across the bottom of another Basic White panel.
I really love how soft and pretty this card turned out. I think I am going to have to give this a try in some different colours.
Bye for now,
Kris
Product Used:
Stamping with Kris 