Happy Birthday Jason
My son-in-law just celebrated his 40th birthday and today I am sharing the card I made for him. I was inspired by this one on Pinterest. I began by cutting a star from Whisper White card using the Stitched Stars Dies. I stamped “happy” from the Well Said stamp set below the die cut star, firstly using Coastal Cabana and then using Bermuda Bay. I embossed the panel using the Subtle 3D Embossing Folder. The panel is attached to scored and folded Night of Navy card. I cut a smaller star from Coastal Cabana card using the Stitched Stars Dies and another star from Bermuda Bay using the same dies.
I attached the Coastal Cabana star in the centre of the die cut star using Mini Dimensionals. I attached the Bermuda Bay star to the left of the Coastal Cabana star also using Mini Dimensionals. I die cut “happy” from Night of Navy card using the Well Written Dies and attached it below the stamped “happy”.
To create the inside of my card, I created a slightly smaller folded card from Whisper White card. I cut “happy” and “birthday” from Night of Navy card, I also cut just the “th” from birthday using the Well Written Dies. I cut “40” from Night of Navy card using the Playful Alphabet Dies. I attached the die cuts to the front of the folded Whisper White card, making sure that the fold was on the right. I stamped the solid balloon from the So Much Happy stamp set below the greetings using Coastal Cabana ink. I stamped the starry balloon from the same stamp set onto Whisper White card using Bermuda Bay ink and cut it out using the co-ordinating Happy Die. I stamped the small striped balloon from the So Much Happy stamp set onto Whisper White card using Night of Navy ink and cut it out using the same Dies.
I attached the two die cut balloons partially over the Coastal Cabana balloon. I decorated the inside of the card by stamping three balloon strings from the So Much Happy stamp set onto the left hand side of the panel using Night of Navy ink. I stamped each of the balloons using the same coloured inks and cut them out using the Happy Dies. The balloons are attached to the ends of the strings with the solid Bermuda Bay balloon on dimensionals. The Whisper White card is attached to the inside of the Night of Navy card. I have made this fancy fold before and I am always delighted with the finished product. Thankfully Jason loved his card as well.
Bye for now,
Kris
Product Used:
Rocketman
We were finally able to visit the Redcliffe Entertainment Centre and watch Dave, who gives Ron and Ethan guitar lessons, play in the Rocketman Elton John Tribute Band. What a performance! So, today’s page shows off some photos from that event. I used Whisper White 12″ x 12″ card as the base for each page and to each one I attached a piece of In Good Taste Designer Series Paper. I embossed the strips of Smoky Slate and Early Espresso card using the Pinewood Planks 3D Embossing Folder.
The filigree pieces on each page were cut from Smoky Slate and Early Espresso card using the Be Mine Stitched Dies. I stamped the guitar from the retired Country Life stamp set onto Whisper White card using Memento Tuxedo Black ink and coloured the image using the light Night of Navy and Light Smoky Slate Stampin’ Blends. I stamped the piano image from the retired Music From My Heart stamp set onto Whisper White card and coloured it using the Light Basic Black Stampin’ Blend. All of the stamped images were cut out by hand. The journaling, which is printed onto Whisper White card, has a Night of Navy mat. All of the photos are attached directly onto the page, except the one of Dave which has an Early Espresso card mat.
So glad to have created these pages of this fantastic memory.
Bye for now,
Kris
Product Used:
More Joy To The World
Today’s cards are made from the product included in the Joy to the World Paper Pumpkin Kit to create one card. To create the cards, I cut the card base in half and trimmed down the Crumb Cake panel. I stamped “Merry Christmas” onto the lower left hand corner of the Crumb Cake panel using Memento Tuxedo Black ink. I embossed the stamped panel using the Subtle 3D Embossing Folder and attached it to Gold Foil card and then scored and folded Thick Whisper White card.
I trimmed down the embossed card front and attached it to Gold Foil card. The panel is attached to the embossed Crumb Cake card. I attached the floral die cut to the bottom right hand corner of the Whisper White embossed panel using dimensionals.
To decorate the inside of the card, I stamped the greeting from the kit using Memento Tuxedo Black ink. For the second card, I embossed Whisper White card using the Subtle 3D Embossing Folder, attached it to Gold Foil card and then scored and folded Thick Whisper White card.
I trimmed down the gold embossed front panel and attached it to Gold Foil card and then the card front. I attached the floral die cut to the bottom left hand edge of the card front using dimensionals.
I attached the gold banner included in the kit across the top right hand section of the card front. I stamped “Merry Christmas” from the included stamp set onto the label from the using the Just Jade Stampin’ Spot.
I attached the greeting to Just Jade card and then the card front over the gold banner using dimensionals. To decorate the inside of the card, I stamped the greeting from the stamp set using the Just Jade Stampin’ Spot. I attached Gold Foil card behind one long edge of a piece of the gold embossed front panel. The panel is attached across the bottom of the inside of the card.
I think these cards look so pretty, don’t you.
If you need more inspiration there are plenty of examples on the internet and pinterest in case you need more persuading to purchase the Joy to the World Paper Pumpkin Kit.
Bye for now,
Kris
Product Used:
You can find the Joy To the World Paper Pumpkin Kit here.
Joy To The World
That’s what the Paper Pumpkin kit is called that became available for purchase on the 3rd December (Item No. 155876, $37.00). The kit contains enough product for you to create four cards each of two different designs. The only thing you will need in addition to the kit is a clear block. I created one of each of the cards yesterday on my Facebook Live and thought you might like to see a variation using the card kit pieces. To begin I embossed Crumb Cake Card using the Pinewood Planks Embossing Folder. I attached the embossed panel to scored and folded Crumb Cake card. I cut down the gold embossed front panel of the card and attached it to Gold Foil card before attaching it to the card front.
I trimmed the embossed panel from the card kit and wrapped it with the Cherry Cobbler twine and tied a bow. I attached the embossed panel to the card front using dimensionals (also included in the kit). I attached the wreath die cut from the kit to the embossed panel using dimensionals.
The joy is a Gold Foil die cut from the card kit. I stamped the greeting from the stamp set onto the label using the Just Jade stampin’ spot which is also included in the kit. The greeting is attached to the card front using dimensionals. To decorate the inside of the card, I stamped the greeting using the Just Jade Stampin’ Spot. I attached some Gold Foil card behind one long edge of another piece of the gold embossed card front. The panel is attached across the bottom of the stamped Whisper White card. I used up most of the kit, just a couple of small pieces of the gold embossed card front which I have kept “just in case”.
If you haven’t purchased your Joy To The World Paper Pumpkin kit, take another look. You won’t regret it!
Bye for now,
Kris
Product Used:
You can find the Joy To The World Paper Pumpkin Kit here.
Happy Holidays
Sometimes I get stuck for ideas when I want to use a specific stamp set, so I often purchase tutorials from Connie & Mary to get me started. Today’s card was inspired by one of their creations but, of course, I had to put a little of my own spin on it. I attached two different pieces of the Poinsettia Place Designer Series Paper to the left hand side of Cherry Cobbler card. I stamped the greeting from the Poinsettia Place stamp set onto Whisper White card using Garden Green ink and attached it to the card front partially over the Designer Series Paper.
I attached a narrow strip of Soft Suede card across the card front before attaching the whole panel to scored and folded Thick Whisper White card. I stamped the flower, two leaves and two berry stem images from the Poinsettia Place stamp set onto Whisper White card using Soft Suede ink. I added the berries to the berry stems using Real Red ink and coloured the flower using Cherry Cobbler Stampin’ Blends and also the leaves using Shaded Spruce Stampin’ Blends.
I cut out the images using the co-ordinating Poinsettia Dies. I cut Silver Foil card using another leaf die and the flower centre from the Poinsettia Dies. I attached the flower to the card front using dimensionals and attached the leaves and berry images behind the flower. I coloured six small Basic Rhinestones using the Dark Cherry Cobbler blend and attached them to the flower centre. The flower centre is attached to the flower using a Glue Dot. To decorate the inside of the card, I stamped the greeting from the Wishes & Wonder stamp set using Garden Green ink. I stamped the berry stem from the Poinsettia Petals stamp set next to the greeting using Soft Suede ink. I added the berries to the stem using Real Red ink.
I love this card, don’t you? Thanks Connie & Mary for the inspiration.
Bye for now,
Kris
Product Used:
Curvy Thinking of You
Today’s card uses the Quite Curvy stamp set and the Curvy Dies which are part of the Curvy Celebration collection. This stamp set and the co-ordinating dies will be part of the next Mini Catalogue launching in January, but we (demonstrators and customers) are able to pre-order them and get to know them early. I love this idea and so will you once you have seen how amazing these products are! Today’s card is relatively simple but quite pretty. I cut Whisper White card approximately in half using the dotted Curvy Die.
I stamped the floral image from the Quite Curvy stamp set onto the bottom left hand side of the piece without the dots and the top right hand side of the piece with the dots. I coloured the images using the Dark Highland Heather and Light Old Olive Stampin’ Blends.
I attached the Whisper White pieces to Highland Heather card and then scored and folded Thick Whisper White card. I stamped the bird image from the Quite Curvy stamp set onto scrap Whisper White card and coloured it using the Light Crumb Cake and Light Highland Heather Stampin’ Blends. I cut out the bird using the co-ordinating Curvy Die and attached it to the card front. To decorate the inside of the card, I stamped the floral image on the top and the bottom of Whisper White card using Memento Tuxedo Black ink. The images are coloured using the Dark Highland Heather and Light Old Olive Stampin’ Blends.
I hope you are inspired to take another look at this early-bird special.
Bye for now,
Kris
Product Used:
Pizza Night
Sarah & Sean invited us around for a Pizza night. What fun Sean cooked all the pizzas on the barbeque and then we sat around the fire pit listening to Ethan play the guitar. I attached my photos to a piece of Sahara Sand card before attaching it to a Whisper White 12″ x 12″ page. I created the journaling on the computer and printed onto Whisper White card.
I stamped the greeting from the retired Hug in a Mug stamp set using Memento Tuxedo Black ink. I attached the journaling to Basic Gray card and then the page. I cut the multi heart image from Soft Sea Foam card and the large heart from Blushing Bride card using the Be Mine Stitched Dies. I stamped the greeting from the retired Part of my Story stamp set onto the Blushing Bride heart using Memento Tuxedo Black ink. I attached the large heart slightly over the Soft Sea Foam hearts. Lastly I added one of the hearts from the Soft Sea Foam die to the journaling panel.
I know, it’s simple, but you already know that’s my style.
Bye for now,
Kris
Product Used:
Wonderful Mountains
Today’s card was inspired by one I had saved on Pinterest which uses retired Stampin’ Up! stamps but inspired me to take out my Mountain Air stamp set. I loved the neutral colours used on the card on Pinterst so my first card uses neutral colours.
I stamped the greeting from the Rooted in Nature stamp set onto the lower right hand corner of Whisper White card using Basic Gray ink. I embossed the stamped Whisper White panel using the Pinewood Planks Embossing Folder. I attached the embossed Whisper White card to scored and folded Basic Gray card.
I stamped the solid mountain image from the Mountain Air stamp set onto a 5cm wide strip of Whisper White card using Smoky Slate ink. I stamped the detailed mountain image over the top of the solid mountain image using Gray Granite ink. I added the trees from the Mountain Air stamp set using Basic Gray ink. I attached the stamped panel to Basic Gray card and then the embossed Whisper White card.
To decorate the inside of the card, I stamped the tree image from the Mountain Air stamp set across the bottom of Whisper White card using Basic Gray ink. I loved this card so much that I just had to create another one this time with a little more colour. This card uses Soft Sea Foam ink for the solid mountain image with the detailed image stamped in Just Jade ink.
I stamped the tree image from the Mountain Air stamp set and the greeting from the Rooted in Nature stamp set using Shaded Spruce ink. I used Shaded Spruce card to create the card base and layers. I was kind of on a roll, so I just had to do one more! This time, I stamped the solid mountain image from the Mountain Air stamp set using Rococo Rose ink. I stamped the detailed mountain image using Rich Razzleberry ink and the tree image using Blackberry Bliss ink. The base card is Blackberry Bliss and the greeting from the Rooted in Nature stamp set is stamped using Blackberrys Bliss ink.
I think these cards are amazing, so thanks to Amylovesnormajean who posted the original card. I really would love to know what you think of my take on this card.
Bye for now,
Kris
Product Used:
A Christmas Tree
Remember when I shared the Tag Buffet Project Kit with you, I said that there was a lot of pieces left over, well today I thought I would share a card I made using up some of the Christmas Tree die cuts. I attached Shaded Spruce card to the left hand side of Whisper White card and embossed the panel using the Old World Paper 3D Embossing Folder. I attached the embossed card to scored and folded Soft Suede card. I attached a piece of Classic Christmas 6″ x 6″ Designer Series Paper across the bottom of the embossed card.
I attached the Christmas Tree die cut from the Tag Buffet Project Kit to Whisper White card and then Soft Suede card. The image panel is attached to the card front using dimensionals.
I stamped the present image from the Most Wonderful Time stamp set onto Whisper White card using Real Red ink and again using Garden Green ink. I stamped the bow image onto the Real Red presents using Shaded Spruce ink and onto the Garden Green presents using Real Red ink. I used the co-ordinating Most Wonderful Time die to cut out the presents. I attached three of the presents across the bottom of the Christmas Tree. I cut Gold Foil using the star die from the Most Wonderful Time dies and attached it to the top of the tree. To decorate the inside of the card, I attached the three remaining presents and stamped the greeting from the Tag Buffet stamp set using Shaded Spruce ink.
Did you know that when you have used all of the product from the Most Wonderful Time Medley you can purchase a refill pack. Such a good idea. I hope you enjoyed today’s card.
Bye for now,
Kris
Product Used:
More Curvy Christmas
Today’s card once more uses the Curvy Celebrations product suite. This time I am also using some of the Classic Christmas Designer Series Paper which you can purchase as part of the pre-order beginning today. I stamped the tree image from the Curvy Christmas stamp set across Whisper White card using Shaded Spruce ink. I stamped the greeting from the Curvy Christmas stamp set below the trees using Real Red ink. I cut a piece of Real Red card using the dotted die from the Curvy Dies. I embossed the piece with the dots and the piece without using the Subtle 3D Embossing Folder. I attached the piece without the dots below the greeting and the piece with the dots above the stamped trees.
I also cut the edge of the piece of the Shaded Spruce paper from the Classic Christmas Designer Series Paper using the dotted die. I attached this panel over the Real Red panel at the bottom of the card front. The whole Whisper White panel is attached to scored and folded Smoky Slate card.
To decorate the inside of the card, I attached the small portion of Shaded Spruce Classic Christmas Designer Series Paper I had cut off to create the panel for the front of the card to the bottom of Whisper White card. I stamped the tree image from the Curvy Christmas stamp set above the Designer Series Paper.
I am really starting to love the layers you can create using this product bundle. Only a couple of days to go until you too can purchase these amazing products. You can get all the details about the stamp sets, dies and Designer Series Paper by downloading the PDF here.
I hope I am inspiring you to take a look at these great new products.
Bye for now,
Kris
Product Used:
Stamping with Kris 